EIP Solution for Multi-Parameter Monitors

 

System Introduction
Multi-Parameter Monitor is one of the conventional equipment in hospitals. It has been widely applied to ICU (intensive care units), CCU (coronary care units), wards and operating rooms. With ceaseless improvement of new sensor checking technology, the application demands more powerful capabilities of information analysis and storage. Therefore, multi-parameter monitor must feature higher-level calculating capability and storage capability, as well as exceptional stability and reliability. Besides, medical equipment, particularly special equipment, requires supreme security. Now the multi-parameter monitor is developing towards intelligen tization, specialization, miniaturization, as well as low power and zero pollution.

 

System Principle
Multi-parameter monitor obtains the basic parameters of human body (cardiogram, breathing, blood pressure, blood oxygen, body temperature, etc, and can monitoring project according to clinical needs) through multi-modules. After the process of amplifying, filtering, transmitting and CPU signal processing, the checking results can be saved, printed and connected to central monitoring system network. The monitoring and recording of parameters are controlled by central control unit.

 

Block Diagram

 

 

 

System Configuration

  • Motherboard: EC3-1813CLD2NA
  • CPU: Onboard Intel Atom N450 1.66GHz CPU (Integrate with Intel ICH8-M chipset)
  • Configuration: 1 x DDRII SO-DIMM up to 1GB memory and onboard 1GB DDR2 memory, CRT/LCD controller,
  • 10/100/1000Mbps LAN port, two SATA ports, one CF, four serial ports, four USB ports, one 115Kbps IrDA
  • interface, 1 x 8-bit GPIO, 1~255 sec./min programmable watchdog timer, PS/2 keyboard and PS/2 mouse
  • Operating System: Linux or WinCE or Win98/2000/XP


The system fulfills a series of signal acquisition of sensors, including cardiogram, breathing, blood pressure, blood oxygen, body temperature, etc., conducts real-time processing, and ultimately outputs the final results in multiple formats.

 

The platform supports high-definition LCD and VGA synchronous display. Onboard video supports resolution up to 1400 x 1050, LVDS up to 1366 x 768, and solves the problem that graphics display speed is too slow in DOS mode. It supports thermal printer interface and can communicate with CNS through RS-485 port.


In terms of operating system, we offer customer more freedom and break the tradition that multi-parameter monitor can only be developed in DOS operating system. We provide you with more flexible and broad applications.

 

System Evaluation
1) Small-size; sufficient interfaces.
2) Ultra low power, reliable performance.
The type power of EC3-1813CLD2NA is lower than 12W. It needn´t cooling fan even when it reaches a temperature of 60℃, reducing the risk of unstable operation caused by fan. It is an ideal solution for portable use and powered by battery.
3) High-performance at low-cost

Product Center

Hot Products

IPC-620H

Can use together with spec…

NPC-8220

supports two Intel® X…

IPC-620

Can be used together with …

PDS-1703

17" high-brightness L…

NPC-8208

supports LGA1151 package X…

Applications

EIP Solution for…

The system is required to acqui…

EIP Solution in …

Metro, as one of the primary ch…

Automotive Elect…

Automotive electronics is a fas…

Application of E…

With the rapid economic develop…

EIP Solution for…

With the rapid development of g…