EIP Solution for Blood Cell Analysis

 

System Introduction
The hematology analyzer has been around for more than 50 years, and becoming increasingly popular in hospitals. With the technological development, hematology analyzer starts adopting the newest electronic technology and optics, chemistry and computer technologies, so as to satisfy increasing clinical requirements. It has become the common aim of manufacturers of hematology analyzers to provide more convenient and practical functions, more accurate checking results, as well as higher checking speed.

 

The development of hematology analyzer mainly includes:
1) The parameters of blood routine examination are multiple;
2) Multi-function compound expansion;
3) The checking speed is improving;
4) Checking method has been improved. The test and analysis methods are not limited in a single way. Besides traditional method, it combines a variety of technologies;
5) Easy to use.

 

System Principle
Hematology analyzer adopts various checking technologies (laser method and impedance method, flow cytometric techniques) to categorize and measure blood cells, then displays the checking results on the screen (including chart and table) and prints out checking report. Then the check is completed. All these operations are automated. PC-BASE is the main control part of the system. Now the parameters to be checked are increasing, and a higher checking speed is required. Besides, the main control part should feature high stability, high performance, small size and full functions. The EVOC 5.25’’ SBC EC5-1712CLDNA(B) fully meets customersrequirements. It combines hardware platform with high technologies and features extreme stability. Not only the parameters to be checked are abundant but the checking results are more accurate.

 

EC5-1712CLDNA(B) motherboard is a newly designed low-power embedded industrial motherboard. This SBC integrates Intel Celeron-M 1.0GHz CPU, 10/100/1000Mbps LAN port, audio interface, Compact Flash socket, one IDE port, two SATA, six serial ports, one parallel port, four USB ports, 1-255 (seconds/minutes) programmable watchdog timer, PS/2 keyboard and PS/2 mouse. It can connect a wide variety of peripherals. The functions of EC5-1712CLDNA(B) completely meet customersrequirements and comply with the principle of "Just-enough".

 

Block Diagram

 

 

System Configuration
Motherboard: EC5-1712CLDNA(B)
CPU: Intel Celeron-M 1.0GHz CPU
Memory: 1 x DDR2 SO-DIMM, up to 1GB
Flash storage: 1 x CF
Operating System: Linux, XP, WinCE

 

System Evaluation
1) Motherboard (203 x 146mm) in small size, PCI bus, conveniently expandable to special signal acquisition card;
2) Onboard Intel Celeron-M 1.0GHz CPU (fanless design), reducing the risk of faults caused by heat and improving system stability;
3) Provides additional two universal USB ports so that users can easily install terminal products, upgrade and maintain;
4) Professional after-sales services

Product Center

Hot Products

IPC-620H

Can use together with spec…

NPC-8220

supports two Intel® X…

IPC-620

Can be used together with …

PDS-1703

17" high-brightness L…

NPC-8208

supports LGA1151 package X…

Applications

EIP Solution for…

The system is required to acqui…

EIP Solution in …

Metro, as one of the primary ch…

Automotive Elect…

Automotive electronics is a fas…

Application of E…

With the rapid economic develop…

EIP Solution for…

With the rapid development of g…